how to clean sticky action figures

How do you remove sticky from action figures?

(1) Clean with some bubbly washing liquid! Making use of a sponge or brush might damage the figures – it’s best to gently wash it with your hands instead! This should remove any light stickiness from the figure! When you’re wiping off the water after washing, be sure to use a soft cloth instead of tissues.


Why do action figures get sticky?

The cause of this stickiness or tackiness is the plasticizer that is used the manufacture of action figures. Over long periods of time this plasticizer begins to vaporize. This also means that figures that use softer plastics or PVC are more prone to this stickiness than figures that use harder plastics or PVC.


How do you clean sticky Star Wars figures?

Re: Cures Or Cares for Sticky Figures


Can dust damage action figures?

Answer: No.

At worst, dust just makes your figures look dirty; however, that’s usually the worst thing it can do.

Dust does not damage your figures.


How do you remove sticky plasticizer?

To remove this sticky layer of plasticizer you can leave the figure in a tile of water with soap for some time.

Don’t use hot water since this will make the figure vulnerable for bending.

Lukewarm/cold water is just fine.

When finished you can gently rinse down the figure to prevent soap residue.


What removes sticky residue?

Soak a paper towel in warm white vinegar or room temperature rubbing alcohol, then lay it over the sticker residue for about five minutes.

This will soften the residue so you can scrape it away with a credit card.

WD-40 is also effective for removing sticker residue.


How do I get sticky residue off my ceiling?

Moisten a cotton ball with undiluted white vinegar, a cleaner formulated to remove sticky residues or nail polish remover.

Wait two to three minutes for the vinegar, nail polish remover, cleaner or lubricant to loosen the adhesiveness of the star stickers.


How do you get sticky residue off fabric?


First, dip a white rag or cotton ball in rubbing alcohol.

Then, rub the sticker with the rag or cotton ball.

After sufficiently wetting the sticker area, peel it off!

Rub the area a bit more to remove all sticker residue.

Finally, rewash the clothing item.


How do you clean rubber figures?

Put a small amount of soap on the toothbrush, just a small drop, and begin to give the figure, still wet from its soak, a gentle scrubbing.

Do not use too much pressure, just enough to clean off the dirt and grime.


Why do plastic bags get sticky?

Some times the plasticizers come to the surface and mingle with other materials on the plastic like paints and interact with them to form undesirable material. They feel sticky. After a little research, it seems that some plastic items might have some sort of coating that breaks down over time, and becomes sticky.


How do you remove dust from figures?

Simply spray a bit of canned air into the crevice to blast the dust free and keep it from caking up where you don’t want it.

Note that canned air doesn’t get rid of dust, but simply loosens it and “blasts” it away from where it isn’t wanted.

Use a Swiffer duster to clean up the rest.


Are action figures worth collecting?

Collecting action figures can be an incredibly fun and rewarding hobby.

It can make you feel like a kid again.

And, if you buy carefully, it can become a great financial investment, as many figures reach values of hundreds of dollars on the collectible market.


Should you keep action figures in the box?

Answer: If you want your figures to significantly increase in value, then you should keep them in the original packaging.

Otherwise, it is completely up to you.


Can dust damage things?

Dust on surfaces can make surfaces look dingy and dirty.

Dust can actually cause scratching and damage to household surfaces.

Dust also presents allergy and breathing problems for many groups of people.

Dusting as a regular chore can protect family members and the surfaces of our homes.


Why is my nendoroid sticky?

The reason why figures become sticky is because of the plasticizer used when making them.

This plasticizer is added to the PVC (the main material used in figures) in order to make it softer – the more mixed in with the PVC, the softer and more flexible it becomes.


How do you clean a plasticizer?

Warm soapy water and plastic q-tips for cleaning the hard-to-reach spots are a must.

The affected tubing should be discarded and a fresh tube must be installed.

Preventive steps: Use plasticizer-free tubing only in your water cooling loop.


What is the best Sticky Stuff Remover?

The Best Adhesive Removers for Sticky Messes

BEST OVERALL: Goo Gone Original Liquid.

BEST FOR TOUGH MESSES: 3M General Purpose Adhesive Remover.

BEST FOR VEHICLES: Custom Shop Restoration Grease and Wax Remover.

BEST FOR OIL AND GREASE: Oil Eater Original.








Shopping Cart
Scroll to Top